***Back in Stock!***
The MX-7 PLUS Hard Water Spots/Stains Remover & Cleaner for PAINT. It is a Wipe on & Wipe off formula designed for PAINT for Automotive, Marine, and Household.
MX-7 PLUS Hard Water Spots/Stains Remover & Cleaner is a truly s special unique formula designed to penetrate and dissolve Silica, Mineral and Lime Deposits, Calcium, Salt Spray, Fertilizer Spray, Acid Rain Barnacles, Mildew Stains, Rust/Fall Out, Red Dirt Stains, Grease, Oil Drips and Spills, Brake dust on wheels, Soot, Oxidation and more without damaging the recommended surfaces.
***NOT TO BE USED ON AUTO GLASS/WINDOWS***
These recommended surfaces are: Automotive Paint (clear-coat and non-clear coat safe), Aircraft Paints, Chrome, Plastics, Plexiglass, Fiberglass sinks and tubs (gel coat safe on boats), Synthetic Marble, Formica, Corian (*test first), all Vinyls, Leather (*test first), Rubber, Concrete, Terrazzo, Slate, Futura Stone, non-polished Aluminum and other hard surfaces.
MX-7 PLUS is truly a wipe on and wipe off solution that really works in seconds and is a powerful micropore cleaner. MX-7 PLUS may be used in a spray bottle or pump sprayer. Start at the bottom of the surface and more upward. Use a 200 psi pressure washer for super fast stain removal. Rinse sprayer after each use.
DIRECTIONS:
Shake Slightly. Wear protective gloves when using MX-7 PLUS for prolonged periods of time and people with sensitive skin. Always test MX-7 PLUS in a hidden area first. If discoloration occurs, stop immediately and wipe clean with a damp cloth or chamois.
STEP 1: Pour MX-7 PLUS directly onto a terry cloth face towel.
STEP 2: Apply MX-7 PLUS to surface & allow to penetrate for a few seconds, then wipe clean with a damp cloth or chamois. MX-7 PLUS may be applied to more than one surface at a time, this is to allow penetration of stains especially rust & fall out. MX-7 PLUS may dry on all painted and other hard surfaces without damaging. For the best results, apply in the shade to allow MX-7 PLUS to say wet longer. For difficult stains, repeat process as often as necessary.
Penetrates & Dissolves:
* Silica
* Rust/Fallout
* Oil/Grease
* Mineral & Lime Stains
* Soot
* Red Dirt
* And More...
Specially formulated for Clear Coated and Non-Clear Coated Paints.
*NOTE: MX-7 PLUS should NOT be used on any & all glass, anondized parts, or highly polished aluminum. If MX-7 PLUS was used on highly polished aluminum, use a metal polish to brighten dull finish.
*MX-7 PLUS will NOT remove etched in water spots on clear coat.
16 oz bottle
|
